Face Shield Production introduction

By: A W In: Videos On: Comment: 0 Hit: 990

We manufacture the transparent face shield for the Australian Supply

The transparent face shield can be made at 1000/day with 6 people and 2 PET bottles per face shield as it is too slow to ship we are offering the knowhow free to make them in your local area to support the PPE supply.

Model# GMA-1.25 Weight; 31 gram 

GMA Face Splash Shield is designed to offer face protection while allowing for the wearing of most face masks and other PPE. Sanitary wiped at packaging supplied as non-sterile nor sanitised.

The visor wraps around the face giving increased peripheral protection. The air gap between the headband and visor assists in anti fogging allowing a flow of air to help minimise fogging. The edges of the visor are thermoformed to hold shape . The thermoformed head band features rolled edge for skin contact to off set the headband reducing the skin contact to reduce sweating . GMA Face Splash Shield are designed to be used as many times as deemed appropriate for the given usage.

GMA Face Splash Shield can be disassembled for cleaning and sanitising.

Face shields are generally not used alone, but in conjunction with other personnel protective equipment and are therefore classified as adjunctive personal protective equipment. Guidelines for their use vary between governmental agencies and professional societies.” for a review on the Face shields for infection control see https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5015006/ ( a pdf copy can be supplied or downloaded for review)

It is imperative that each hospital should determine appropriate use / reuse protocols based on a review of the product by the hospital's Infection Control group.

If the GMA Face Splash Shield is visibly soiled it should be disposed of as clinical/infectious waste.

Suggested Cleaning of the Face Shield

To ensure the shield is cleaned properly, we recommend disassembling it first by cutting the cable ties . The rubber strap can be left in situation .

  • Headband with strap

Hot water and soap or Isopropyl Alcohol wipe. Air dry.

  • Visor

Hot water and soap or Isopropyl Alcohol wipe. Air dry.

Reassemble the GMA Face Splash Shield by threading new 100 x 2.5mm cable ties and tightening trim the excess off.

This product has not been evaluated for the prevention of specific diseases or infections, the filtering of surgical smoke or plumes, the filtering of specific amounts of viruses or bacteria, or the killing or reduction of the amount of viruses, bacteria or fungi. Health care providers are responsible for decisions regarding appropriate personal protective equipment for their personnel.

Australian Register of Therapeutic Goods , ARTG Identifier 336814 for Greenmoxie Australia Pty Ltd

Comments

Leave your comment